Inicio
rode videomic go ii
RODE VideoMic Go II On-Camera Shotgun Microphone – vlogsfan

RODE VideoMic Go II On-Camera Shotgun Microphone – vlogsfan

4.5 (289) · € 60.00 · En stock

Buy On-Camera Shotgun Microphone with free shipping and free return on vlogsfan. High quality RODE VideoMic Go II On-Camera Shotgun Microphone, with high sensitivity and low noise,Limited Time Sale Easy Return.
Shotgun Mic with Directional Sound PickupWhereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its active electronics and directional condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.Easy Hookup to CameraA detachable coiled 3.5mm cable is supplied for fast hookup to your camera. The cable is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.Runs on Plug-In PowerNo batteries are required to operate the VideoMic GO. Just connect the microphone to your camera or recorder, enable plug-in power on the device, and forget about swapping or charging batteries.Integrated Shockmount Inhibits VibrationsUnderstanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8 thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately).Windscreen Minimizes Wind NoiseThe VideoMic GO has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat GO (available separately).Connectivity OptionsExpand the microphone's device compatibility with Rode accessories such as the SC4, SC7, and VXLR+ (all available separately). With either the SC4 or SC7, you can connect the VideoMic GO directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR+ adapter is the ideal solution when you want to record the VideoMic GO to a camcorder or mixer that has XLR inputs. Specifications Acoustic & Electrical Specifications Acoustic Principle Pressure gradient electret condenser Polar Pattern Supercardioid Frequency Response 20Hz - 20kHz Output Impedance 2K2Ω Signal-to-Noise Ratio 79 dBA Equivalent Noise Level (A-Weighted) 15 dBA Dynamic Range 95 dBA Typical Sensitivity -31dBV(28.78mV @ 94dB SPL) ± 1dB @ 1kHz Max Input SPL 110 dB SPL Output Connection 3.5mm TRS USB-C Computer Connectivity USB-C (USB 2.0) Simultaneous I/O Stereo input and output when in USB mode Power Requirements 3.5mm plug-in power 2 - 5V USB 5V Bit Depth 24-bit Sample Rates 48 kHz Minimum OS Requirements macOS 10.15 Windows 10 (20H2) iOS 14 Android 9.0 Mechanical Specifications Weight (g) VideoMic GO II: 33 VideoMic GO II with SM8-R: 89 VideoMic GO II and all included accessories: 96 Dimensions (mm) VideoMic GO II:Height: 120Diameter: 21.6 VideoMic GO II and included accessories:Length: 150Width: 70Height: 86 Included Accessories 1 x SC14 3.5mm TRS to TRS cable 1 x Foam Windshield 1 x SM8-R Shockmount